Epoxy putty & metal filled compound

Metaset Fast Setting (For Jointing And Filling blow holes and cracks of metal, wood, pattern and castings).

“Metaset” metal filled has higher strength than putty form. Metaset Epoxy Jointing Putties & Metal Filled Compounds like Aluminium Filled, Steel Filled.
Mixing Ratio :
Part A : One stick of Base
Part B : One stick of Hardner Mix them in proper proportion by volume.

Metaset Steel Filled (For salvage CI casting & Steel casting).

To fill blow holes, cracks of castings. Metaset can be drilled, machinable, threaded compounds.
Mixing Ratio :
Part A : 1 or 2 spoon of metallic base.
Part B : 16 drops of hardener.

Metaset Aluminium Filled (To fill cracks for aluminium casting)

To Fill cracks, blow holes and machinable compound. Majorly used to save Aluminium Castings.
Mixing Ratio :
Part A : One spoonful of metallic base from
the container
Part B : 16 drops of hardener

Metaset Brass Filled (For jointing brass casting)

To fill cracks and blow holes of copper based castings.
Mixing Ratio :
Part A : One spoonful of metallic base from the container
Part B : 16 drops of hardner

Metaset Copper Filled (To fill blow holes in copper casting)

To fill cracks and blow holes of copper based castings.
Mixing Ratio :
Part A : One spoonful of metallic base from the container
Part B : 16 drops of hardner

Metaset Gun Metal Filled (To fill blow holes).

To fill cracks of Gun Metal Castings. It’s machinable after 24 hours.
Mixing Ratio :
Part A : One spoonful of metallic base from the container
Part B : 16 drops of hardner

Quick Contact

Quick Contact